 |
|
|
ComOpen() Open a serial device/port for communication. Syntax ComOpen([<cName>], [<cPort>], [<nBaud>], [<cParity>], [<nWord>], [<nStop>]) --> lOpened Arguments <cName> --> Optional name of the communications device to open.
<cPort> --> Port name/identifier. Consult the table below for the list of valid port names:
<nBaud> The port's baud rate. Consult the table below for the list of acceptable baud rates:
<cParity> The parity setting of the port. Consult the table below for the list of valid parity codes:
<nWord> The word size. Consult the table below for the list of valid word sizes:
<nStop> The number of stop bits. Consult the table below for the list of valid stop bits:
Returns TRUE is returned if the communications port was successfully opened, otherwise FALSE is returned. Description Opens and optionally configures a serial port for communication. You may also setup a communications port via a user interface dialog by calling the ComSetup() function. All parameters are optional however it is strongly recommended that they all be specified when calling the ComOpen() function, unless you wish to set-up your parameters using ComSetup(). Example * Set parameters directly If ComOpen("My Port1", "COM1", 9600, "N", 8, 1) Echo("Com port successfully opened.") Endif * Use parameters based on ComSetup() If ComOpen("My Port1") Echo("Com port successfully opened.") Endif ____________________________ Related Topics |
If you intend to open more than one serial
communications device then you must specify a communications device
name, e.g, "Weight Scale", "Cash Register", "Modem", "Serial Port
4", etc., in order to allow CAPITAL to distinguish between
them.